USA 6Mo War! Tektronix BSA125C BertScope CR125A Clock Recovery DPP125C BSAITS125

Description

Set of Tektronix BSA125C BertScope, CR125A Clock Recovery, DPP125C Processor, and BSAITS125 Interface Set, with Options and Accessories
Included:
- BSAITS125 - Tektronix BSAITS125 Interference test set
- BSA125C - Tektronix BSA125C BERTScope 12.5 Gb/s Pattern Generator and Error Analyzer
Options: PL, MAP, ECC, GSM, JTOL, PCISTR, XSSC, SF
- CR125A - 12.5Gbps Clock Recovery Instrument
Options: XLBW
- DPP125C - Tektronix DPP125C Digital Pre-emphasis Processor BERTScope 12.5 Gb/s Hardware Equalization
Options: ECM 4T
BSAITS125 - Tektronix BSAITS125 Interference test set
Brand: Tektronix
Model:
BSAITS125
Type: Interference Test Set
Power consumption: 80 W, maximum
Power requirements: 100 to 240 VAC, 50/60 Hz
Power fuse: T 2A 250 V
Features
Automatic channel switching
IC testing with calibration channels
Addition of common mode and differential mode interference signals
On-board S-parameters for accurately characterized channels
Low-skew differential channels
BSA125C - Tektronix BSA125C BERTScope 12.5 Gb/s Pattern Generator and Error Analyzer
Brand: Tektronix
Model:
SA125C
Type: Pattern Generator and Error Analyzer
Data Range: 0.1 to 12.5 Gb/s
Format: NRZ
Polarity: Normal or inverted
Variable cross over: 25 to 75%
Features
Integrated, calibrated stress generation to address the stressed receiver sensitivity and clock recovery jitter tolerance test requirements for a wide range of standards
Sinusoidal jitter to 100 MHz
Random jitter
Bounded, uncorrelated jitter
Sinusoidal interference
Spread spectrum clocking
PCIe 2.0 & 3.0 receiver testing
F/2 jitter generation for 8xFC and 10GBASE-KR testing
IEEE802.3ba & 32G fibre channel testing
Electrical stressed eye testing for
PCI express
10/40/100 Gb Ethernet
SFP+/SFI
OIF/CEI
Fibre channel (FC8, FC16, FC32)
SATA
USB 3.1
InfiniBand (SDR, QDR, FDR, EDR)
Tolerance compliance template testing with margin testing
Integrated eye diagram analysis with BER correlation
Options: PL, MAP, ECC, GSM, JTOL, PCISTR, XSSC, SF
CR125A - 12.5Gbps Clock Recovery Instrument
Brand: Tektronix
Model:
CR125A
Type: Recovery Instrument
Input sensitivity
100 mV single ended (typical)
50 mV differential (typical)
Input data rate coverage: 150 Mb/s to 12.5 Gb/s
Data insertion loss: 2 dB (min), 2.6 dB (typical), 3 dB (max), up to 12.5 Gb/s
Data input voltage range: -5 V (min), +5 V (max)
Measured edge density accuracy: ± 1%, up to 14.3 Gb/s, ± 3% >14.3 Gb/s
Equalization range: 0 to 10 dB
Data output: Up to 12.5 Gb/s
Features
Instrumentation quality clock recovery.
Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
3.0, SATA 6G, and PCIe Gen-3.
Accurate, adjustable, self-measured, and displayed PLL loop bandwidth, peaking, and JTF – get the "Golden PLL" response needed for standards compliance testing.
Programmable peaking adjustment with first- and second-order roll-off capability.
USB control interface integrated into BERTScope view, or stand-alone with included BERTScope PC software.
DPP125C - Tektronix DPP125C Digital Pre-emphasis Processor BERTScope 12.5 Gb/s Hardware Equalization
Brand: Tektronix
Model:
DPP125C
Input
Data rate range: 1-12.5 Gb/s
Sensitivity (Typical): 250 mV
Termination: 50 Ω, AC coupled
Maximum jitter transfer: 1:1, Input clock to Output data
Data: SIngle-ended, SMA connector
Sensitivity (Typical): 250 mV, PN31 pattern
Termination: 50 Ω, AC coupled
Outputs
Data: Differential, SMA connector
Maximum amplitude (Typical): 1.8 V, differential, adjustable
Differential skew (Typical): <2 ps
Maximum DC offset (Typical): ±500 mV
Coupling: AC, AC-coupled data with DC‑coupled output offset
Function: 3- or 4-tap, clocked FIR
Random jitter (Typical): <350 fsRMS, additive, 1010 pattern
Tap range: –100 to +100 (including 0) in 1% steps
Tap resolution: 1% or 0.1 dB, any tap
Transition time: <40 ps, all taps, 1010 pattern
Features
1 to 12.5 Gb/s for Support of Hardware-based Equalization of 2nd- and 3rd-generation Serial Standards
3- or 4-tap for Full Support of Compliance Testing for 802.3ap, Serial Attached SCSI, 10GBASE-KR Backplanes, DisplayPort™, USB 3.0/3.1 PCI Express® Gen3
Pre-cursor or Post-cursor Adjustment for Optimizing Compensation for ISI and Loss
Exceptionally Easy Setup with Concurrent Multiple Domain Views Ideal for Operation as a Stand-alone Instrument Controlled by a Remote PC, or with a BERTScope for Complete Software Integration
Precise Control to Correct for Effects such as Backplane ISI or Optical Effects with Adjustability through Tap Weights or Step Response provides the Flexibility Needed for Complete Design Characterization
Optional integrated reference clock multiplication to PCIe compliant 2.5 GHz, 5 GHz, and 8 GHz
Optional integrated eye opener functionality for testing DUTs with long channels
Optional integrated clock doubler enables full rate stress for 12 Gb/s SAS
BERTScope Clock/Data delay compensated internally to allow length-matched cables
Enclosure with the BERTScope footprint to allow equipment stacking
New microcontroller to provide more processing power
RS-232 interface enhancement to speed up PCIe receiver equalization link training
Options: ECM 4T
EA 08-05-21
__________________________________________________________________________________________________________________________
Payment
* Paypal
* Visa, Mastercard, AMEX taken directly from seller
* Santa Clara County sales tax will be applied if you are a California resident.
__________________________________________________________________________________________________________________________
Terms
* Payments must be received within 10 business days after our confirmation was sent to all winning bidder(s).
* Warranty Start on the day the item is delivered.
* Buyer are responsible for all software or software related issues.
* All shipping costs are non-refundable for any circumstances.
* Buyer pays all freight costs for returning the product(s).
* All returned items must be the same condition as shipped in order to receive a refunds.
* 20% Restocking fee applies to customer errors.
__________________________________________________________________________________________________________________________
Returns (RMA):
* If you have an issue with your item once it is received, please contact us through ebay message and we will try our best to help resolve the problem.
* If your item is in need of a replacement, repair, refund or exchange, please send a message through ebay for RMA number and instruction.
__________________________________________________________________________________________________________________________
Shipping
* International please email for shipping quote first
* Buyer is responsible for all custom fees and/or import taxes.