SL-030 Surface Resistance Tester Anti-static Tester SLD Static Tester

Description

Discover Industrial
SL-030 Surface Resistance Tester Anti-static Tester SLD Static Tester
Specifications:
1.SL030 Antistatic Surface Resistance Tester
2.can inspect anti-static products ability
3.measure the surface impedance
Description:
1.This small pocket detection table can measure the surface impedance, and measurement of ground resistance, wide range, from 103 ohm/ to 1012 ohm/, accuracy of + 1/2 range.
2.030 adopts ASTM standard D-257 parallel electrode sensor method, can simply, repeatedly measure all kinds of transmitting, electrostatic discharge, insulating surface.
Technical parameter:
Power:: 9V PP3 alkaline battery
Test voltage:: 9V
Temperature range:working temperature 5℃--49℃
Storage temperature:-15℃--60 ℃
Relative humidity: 0%--90% (not state of condensation)
Measuring degrees: in the order magnitudes of ten
Change point:1/2 Logarithmic degree (3.16* 10 n)
Transition point accuracy: + 1/2 degree
Accuracy: + 10 %
Repeatability: + 5%
Weight: 170g
Dimensions: 130 * 70 * 25 (mm)
HOW TO USE:
To measure the surface impedance, place the meter on the surface to be measured and hold down the red Test button. The continuously illuminated LED indicates the magnitude of the measured surface impedance.
103=1千Ohm green LED
104=10千Ohm green LED
105=100千Ohm green LED
106=1兆Ohm yellow LED
107=10兆Ohm yellow LED
108=100兆Ohm yellow LED
109=1000兆Ohm yellow LED
1010=10000兆Ohm yellow LED
1011=100000兆Ohm yellow LED
1012=1000000兆Ohm red LED
1012=insulation red LED
Measurement of resistance to earth:
1. Insert the Ground wire into the Ground socket, so as to insulate the detection electrode on the right side of the meter (on the same side with the socket). Clamp the alligator to your floor.
2. Place the meter on the surface to be measured, hold down the Test button, and the continuously glowing LED indicates the magnitude of the resistance value to the ground. The unit of measurement is ohms.
Calibration period SL-030 surface impedance meter calibration method:
* Calibrate the SL-030 surface impedance meter every 12 months
* Using a decade resistance box, connect the standard measurement resistor between two parallel electrodes of the SL-030 meter to verify that the displayed impedance value is correct.
Calibration procedure of surface impedance meter:
1, SL-030 surface resistance tester uses 1% ultra-thin film resistance and high-speed amplifier circuit, its calibration steps are based on the linear circuit technology of the product.
2. The conversion point of impedance value is 1/2 logarithm, that is, 3.16× 10N, and the linear value of the conversion point is ± 10% of the mean value perunit of each measurement gear.
3. Measuring instrument: Decade resistance box. The resistance of the test electrode resistance box should be 1×103 to 999×106 megohm or 109. CADGENERAATED techniques are used when the resistance value is greater than 109.
4, connect the resistance box of two electrodes to SV - 2080 on two parallel electrodes, dispatch resistance to 1 k, the table of 103 light-emitting diodes (leds) should be bright, other archives of calibration and so on, measure the impedance transformation point, press the switch and continuously adjust the impedance values of impedance bridge, and observation was made in a LED lights when normally on the impedance value (when the value for the transformation of impedance values).
Notice: According to international shipping requirements, it is forbidden to have powder, liquid, nor battery in package,In order to avoid delay of transportation, we will have to check and take out these items before packing.
Payment:
We currently only accept payment through PayPal.
Payment must be made within 12 days after the auction/bid ends, or eBay will open Unpaid Item case automatically later.
Feedback:
We strive for positive Feedback on all transactions and nothing less than an overall Detail Seller Rating (DSR) of 5 STAR.If you are considering giving a neutral or negative Feedback or a low DSR. Do write to us and give us an opportunity to address your concerns firstly.We will leave the positive feedback when we got your positive feedback.
Delivery details:
We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
Items are generally shipped out the 1-5 business day after your payment has been cleared (Sat. & Sun. excluded.)
Orders from the United States will all be shipped out via epacket. The shipment usually takes 10-14 days, if you need the item urgently, please contact us for detail before purchase.
Customers from other country, if your order passed 30 USD , your package with be shipped with tracking service for free ,if less than 30 USD, your order will be shipped without tracking number by China Post. The shipment usually takes 20-30 days.if you need the item urgently, please contact us for detail before purchase
RETURN POLICY:
We offer 14 days return policy from the day you received your item under the following conditions All returns must be in the original non-damaged condition, including packaging, documentation, warranty cards, manuals and accessories or else it will not be accepted.
Original shipping & handling charges are not refundable.
Customer is responsible for shipping, shipping cost and proof of delivery on all returns. Please be sure that you return shipments are properly packed and fully insured. We are not responsible for returned packages if lost by shipper/carrier or got damaged buy carrier.
Shipping cost (to and from buyer) will be charged for any refused shipping delivery (include duties, taxes and customs fee if any).
TAX&VAT
Please read this before buying International Shipping may Be Delayed Due to Customs. Customers are Responsible For All Import Charges, Tariffs, Duties, Taxes, and Fees Associated with Import of the product. Shipping Charges does not include any Import Charges, Tariffs, Duties, Taxes, and Fees Associated with it.
Contact us:
Please contact us with any comments, questions or suggestions that you may have bysending ebay message, All the mail will be replied within 24 hours. Please ensure your mail box would not blocked / filtered our mails.we will be happy to assist you. please feel free to contact us for WHOLESALES deal,we will surely give you a satisfatory price. We would try our best to serve you with any question / problem. Please contact us first before leaving Negative / Neutral Feedback or open any cases.
Copyright 2018 Discover Industrial. All rights reserved.