-40%
IXIA 5G RAN Testing Radiohead 400MHz-6GHz RH 400-600
$ 1583.99
- Description
- Size Guide
Description
ZOMBIE COMPONENTSTHE LARGEST IXIA RESELLER ON EBAY
IXIA 5G RAN Testing Radiohead 400MHz-6GHz RH 400-600
Modified Ace Axis A RTSx4
HIGHLIGHTS
•400MHz to 6GHz frequency range
•FDD/TDD support
•4x4 MIMO
•Class leading RF timing alignment for OTA test
•100Mhz instantaneous bandwidth
•TX output power 0dBm (400-2700MHz)
•TX output power -10dBm (2700-5500MHz)
•TX output power -15dBm (5500-5925MHz)
•Support for CPRI V4.2
•CPRI line rates 1-8 supported
•Ambient temperature range 5-50 degree C
•RF connectors SMA
•Low power consumption typical < 80W
•Product Weight 12Kg
SPECIFICATION
VALUE
Bandwidth
100 MHz
Frequency ranges
400-6000MHz
Operating mode
FDD/TDD
Number of Tx/Rx paths
4x4 MIMO
Digital baseband I/F
CPRI V4.2
Clock reference
Recovered from CPRI line rate
Ambient Temperature range
5-50 C
Module RF connectors
SMA
Power meters
Tx and Rx power meters located at the antenna
Calibration
Continuous compensation of quadrature (IQ) imbalance
PSU Spec
100 – 240 VAC, 50-60 Hz; 80W
Replaceable or resettable fuse Input: IEC-C14
PHYSICAL/ENVIRONMENTAL AND ELECTRICAL SPECIFICATIONS
SPECIFICATION
VALUE
Height
1U
Depth
Depth 630mm;
Weight/Mass
12kg including removable rails (but with no packaging)
19” Rack connection
Tool-less rack supplied with product.
Rail Range: Min = 660mm ; Max = 800mm
Front Panel
8 x SMA RF connectors, female (4 x Rx, 4 x Tx) LED Panels: see Requirements section for details
Rear Panel
2 x SFP+ ports (bidirectional CPRI), 2x Ethernet Power Input: IEC-C14
Ground Lug with bolt/washer or equivalent 2 x SMA TDD pulse outputs
Cooling
Internal Fan cooling
TRANSMIT SPECIFICATIONS
SPECIFICATION
VALUE
Tx power (OFDM)
TX output power 0dBm (400MHz-2.7GHz) TX output power -10dBm (2.7-5.5GHz) TX output power -15dBm (5.5-5.925GHz)
Tx max. power (CW)
≥10dBm (400-2700MHz) 0dBm (2700-5500MHz)
-5dBm (5500-5925MHz)
Tx power meter
Wideband power @ antenna
Tx gain range
>40dB
Tx gain accuracy
0.25dB
Tx spurious emissions
<-45 dBm
EVM
<1.2% 400MHz to 2.0GHz;
<1.4% median and 2% peak 2.0GHz to 4.0GHz;
<1.6% median and 3.5% peak 4.0 GHz to 6 GHz
Noise power density
<133dBc/Hz @ 10Mhz offset
Tx to Tx isolation
>50dB
Tx to Rx isolation
>60dB
DAC
16 bit
Gain Flatness (over full bandwidth)
0.8dB
Ripple (over full bandwidth)
0.6dB
RECEIVE SPECIFICATIONS
SPECIFICATION
VALUE
Rx power max. (no damage)
30dBm
Rx power meter
Wideband power @ antenna
Rx gain range
60dB
Rx gain accuracy
0.25dB
Spurious emissions
<-45dBm
Pass band ripple
<±1dB
Demodulation Accuracy (in terms of EVM )
< 1.1% 400MHz to 2.0 GHz @ 256 QAM
< 1.5% 2.0GHz to 4.0GHz @ 256 QAM
< 1.5% median and 3.5% peak 4.0GHz to 6.0GHz @ 256 QAM
TIMING ALIGNMENT
SPECIFICATION
VALUE
TX Delay Alignment (TX port to any TX port)
<=5nS
RX Delay Alignment (RX port to RX port same CPRI link)
<=5nS
RX Path Alignment (variation between antenna)
<=15nS
Delay adjustment
+/- 4nS
Delay reporting
T12,T2a ad Ta3 per the CPRI Spec
PAYMENT
SHIPPING
RETURNS
QUALITY CONTROL
CONTACT US
PAYMENT
SHIPPING
RETURNS
QUALITY CONTROL
CONTACT US
We accept payment by any of the following methods:
PayPal PREFERRED
WE CAN ALSO ACCEPT CASH ON PICK UP, PROCESS CREDIT CARDS THROUGH PAYPAL OR OTHER FORMS OF PAYMENT BUT WE ASK THAT YOU COORDINATE THIS WITH US PRIOR TO MAKING A PURCHASE
ALSO PLEASE NOTE THAT WE MAY TAKE UP TO 3 BUSINESS DAYS TO SHIP FROM THE TIME YOU ORDERED,
WEEKENDS ARE NOT COUNTED.... SO IF YOU PLACE AN ORDER FRIDAY NIGHT WE MAY NOT GET IT OUT UNTIL THE FOLLOWING WEDNESDAY (WORST CASE SCENARIO) THOUGH WE SHIP AS SOON AS WE CAN. WE ALSO RESERVE THE RIGHT TO CHANGE THE METHOD OF SHIPPING SELECTED AT THE TIME OF PURCHASE TO AN EQUIVALENT OR BETTER DELIVERY SERVICE THAT BEST FITS THE ITEM BEING DELIVERED.
IF YOU NEED A FASTER SERVICE, PLEASE TELL US SO WE CAN ADJUST OUR PRIORITIES BUT PLEASE DON'T EXPECT EXPEDITED SERVICE UNLESS YOU ASK US TO DO SO FIRST AS OUR COMMITMENT IS 3 DAYS IF YOU HAVE NOT SPECIFICALLY ASKED FOR FASTER SHIPPING.
WE SHIP WORLD WIDE .. SOME ITEMS MAY TAKE UP TO 5 DAYS TO PALLETIZE AND SHIP
Please note that the US Mail (USPS) may not be an acceptable choice for international shipping
due to package size and weight restrictions and export documentation requirements. If you choses USPS for your international shipment, you may be told you have to select FedEx or USPS or even DHL at a higher price due to the restrictions when using USPS. If you have a question on this, please confirm your shipping choice with us before placing your order.
INTERNATIONAL SHIPMENTS MAY BE DELAYED OR CANCELLED DUE TO EAR AND ITAR EXPORT COMPLIANCE REQUIREMENTS.
THE VAST MAJORITY OF OUR ITEMS DO NOT NEED EXPORT LICENSES AND CAN BE SHIPPED UNDER EAR99 AND OTHER EXEMPTIONS. ITEMS THAT DO REQUIRE EXPORT LICENSES SHOULD BE INDICATED WITHIN THE LISTING.
International Orders are subject to DUTIES, TAXES or other Import Fees; the bidder/buyer[s] is solely responsible for these fees, documents and transportation if held at a customs office in the destination country. In the event that you have questions about international shipping logistics please contact us before purchase.
UNLESS INDICATED AS "SOLD AS IS NO RETURNS, If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for 30 days from the date you purchased it OR LONGER, DEPENDING ON THE TERMS IN THE LISTING.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
UNLESS AN ITEM IS INDICATED
AS "SOLD AS IS - NO RETURNS" YOU ARE COVERED WITH A FULL MONEY BACK GUARANTEE FOR AT LEAST 30 DAYS OR LONGER AS SPECIFIED IN THE LISTING.
ELECTRONICS IN GENERAL
WHERE POSSIBLE ITEMS ARE TESTED. THE VALUE OF AN ITEM GREATLY CONTRIBUTES TO THE AMOUNT OR EFFORT PUT INTO TESTING. IT JUST ISN'T POSSIBLE TO TEST MANY LOW VALUE ITEMS DUE TO THE TIME REQUIRED AND THE EXPENSES ASSOCIATED WITH IT. ITEMS THAT ARE NOT SPECIFICALLY TESTED IN DETAIL ARE VISUALLY INSPECTED AND REVIEWED FOR THEIR OPERATIONAL STATUS. REMEMBER ...YOU ARE COVERED WITH A MONEY BACK GUARANTEE REGARDLESS.
COMPUTERS
IN MOST CASES THE ITEMS WE SELL ARE Removed from used computers. THEY ARE Tested where possible. ON COMPUTER ITEMS WE GO A LITTLE FARTHER WITH OUR 100% MONEY BACK GUARANTEE BY OFFERING YOU OUR ZERO RISK NO QUESTIONS ASKED 60 DAY MONEY BACK WARRANTY ON ALL OUR COMPUTER PARTS .... WE WILL EVEN PAY THE RETURN SHIPPING COSTS FOR YOU IN ADVANCE. (ANY EXCEPTIONS ARE NOTED IN THE SPECIFIC LISTING)
APPLIANCE PARTS
Used items are cleaned, clear plastics are hand polished to reduce visible scuffs or scratches. Paint chips are sometimes but not always repaired. Lime and rust deposits are removed to the best of our ability. Some minor repairs may be performed. Any exceptional wear will be noted in our description. We do our best to restore any used item but the final condition the restoration is subjective to ones opinion. If you take issue with an Items condition we promise to work with you to resolve this. Note that stock photos are often used and are not the exact item being sold. If you would like to request a different or an actual photo of an Item you are interested in, please submit a request before buying.
Confused by the part numbers? Keep in mind that many companies make parts for many different brand names. There is a ton of crossover, here are some examples:
GE Brand Part: GE brands include:
Hotpoint
RCA
Sears / Kenmore.
Frigidaire Brand Part: Frigidaire brands include:
Gibson
Kelvinator
Westinghouse
Electrolux -Electrolux also makes various appliance models for Sears / Kenmore
Various others
Whirlpool Brands Parts: Whirlpool brands include
Whirlpool
Maytag
LG
KitchenAid
Jenn-Air
Amana
Magic Chef
Admiral
Norge
Roper
Samsung
Various others
Sears / Kenmore
WE ASK THAT YOU STICK TO USING EBAY AS OUR COMMUNICATION MEDIUM.
PLEASE DO NOT SHARE YOUR CONTACT INFO WITH US OR ASK FOR OUR CONTACT INFO
UNLESS YOU HAVE PURCHASED AN ITEM
AND NEED TO PICK IT UP OR YOU NEED TO DISCUSS AN ITEM THAT YOU HAVE ALREADY PURCHASED.
ONCE YOU HAVE PURCHASED AN ITEM WE WILL BE GLAD TO TALK WITH YOU DIRECTLY ON THAT ITEM.
ANY CONTACT OUTSIDE OF EBAY CAN RESULT IN THE SUSPENSION OF OUR ACCOUNT IN ANY SITUATION OUTSIDE OF THESE REQUIREMENTS.
ATTENTION PLEASE!
IXIA CLIENT SOFTWARE:
The software provided on all Ixia items is the server software only. The server software has ixserver and ixplorer as the only desktop applications. The server application licensed features are accessed through various Ixia client applications that interact with the chassis server.
You can download the Ixia client applications if you have online access with Ixia. These client applications are typically free from Ixia but you will need an Ixia logon account
. We offer a selection of these applications to our customers at no charge but the selection is incomplete. We do not sell these with the servers as a package. Client application needs are the buyers responsibility, we do not guarantee that we will have all your needs though we will try to assist you if we can. We only guarantee the server applications as itemized in the listings.
In a single user environment you can set the client side GUI interface on a external PC or you can set them up on an application server when using a chassis in a multi-user environment to access and configure all the sub-license features included in a listing. Multiple chassis can be accessed in the client applications environment which allows you to use the licensed features of several chassis all at once in one interface.
WHAT YOU SEE IS WHAT YOU GET...
What is included in this listing will be shown in the pictures. If you do not see an
accessory
in the pictures and it is not specifically listed as included in the condition description or the listing description, the accessory is not included. Please read the descriptions completely for exceptions on this.
GENERAL REFUND POLICY
:
You are covered with a full money back guarantee for at least 30 days or longer as specified in the listing, unless an item is indicated as "Sold as is - no returns". We go beyond that by promising that if you are dissatisfied for any reason and if we cannot fix this with you, we will give you 100% of your purchase price back as a cash refund. This will include the original shipping costs if your dissatisfaction is due to an issue with the item you bought being "Not as described".
ALL WE ASK IS THAT YOU CONTACT US FIRST AND GIVE US A CHANCE TO WORK THINGS OUT WITH YOU. PLEASE DO NOT LEAVE NEGATIVE FEEDBACK IF YOU HAVE NOT FIRST CONTACTED US TO FIX WHATEVER ISSUE YOU HAVE.
WE SHIP WORLD WIDE!
See our other items
Modified Ace Axis A RTSx4 HIGHLIGHTS •400MHz to 6GHz frequency range •FDD/TDD support •4x4 MIMO •Class leading RF timing alignment for OTA test •100Mhz instantaneous bandwidth •TX output power 0dBm (400-2700MHz) •TX output power -10dBm (2700-5500MHz) •TX output power -15dBm (5500-5925MHz) •Support for CPRI V4.2 •CPRI line rates 1-8 supported •Ambient temperature range 5-50 degree C •RF connectors SMA •Low power consumption typical < 80W •Product Weight 12Kg SPECIFICATION VALUE Bandwidth 100 MHz Frequency ranges 400-6000MHz Operating mode FDD/TDD Number of Tx/Rx paths Bitmap Bitmap Bitmap 4x4 MIMO Digital baseband I/F CPRI V4.2 Clock reference Recovered from CPRI line rate Ambient Temperature range 5-50 C Module RF connectors SMA Power meters Tx and Rx power meters located at the antenna Calibration Continuous compensation of quadrature (IQ) imbalance PSU Spec 100 – 240 VAC, 50-60 Hz; 80W Replaceable or resettable fuse Input: IEC-C14 PHYSICAL/ENVIRONMENTAL AND ELECTRICAL SPECIFICATIONS SPECIFICATION VALUE Height 1U Depth Depth 630mm; Weight/Mass 12kg including removable rails (but with no packaging) 19” Rack connection Tool-less rack supplied with product. Rail Range: Min = 660mm ; Max = 800mm Front Panel 8 x SMA RF connectors, female (4 x Rx, 4 x Tx) LED Panels: see Requirements section for details Rear Panel 2 x SFP+ ports (bidirectional CPRI), 2x Ethernet Power Input: IEC-C14 Ground Lug with bolt/washer or equivalent 2 x SMA TDD pulse outputs Cooling Internal Fan cooling TRANSMIT SPECIFICATIONS SPECIFICATION VALUE Tx power (OFDM) TX output power 0dBm (400MHz-2.7GHz) TX output power -10dBm (2.7-5.5GHz) TX output power -15dBm (5.5-5.925GHz) Tx max. power (CW) ≥10dBm (400-2700MHz) 0dBm (2700-5500MHz) -5dBm (5500-5925MHz) Tx power meter Wideband power @ antenna Tx gain range >40dB Tx gain accuracy 0.25dB Tx spurious emissions <-45 dBm EVM <1.2% 400MHz to 2.0GHz; <1.4% median and 2% peak 2.0GHz to 4.0GHz; <1.6% median and 3.5% peak 4.0 GHz to 6 GHz Noise power density <133dBc/Hz @ 10Mhz offset Tx to Tx isolation >50dB Tx to Rx isolation >60dB DAC 16 bit Gain Flatness (over full bandwidth) 0.8dB Ripple (over full bandwidth) 0.6dB RECEIVE SPECIFICATIONS SPECIFICATION VALUE Rx power max. (no damage) 30dBm Rx power meter Wideband power @ antenna Rx gain range 60dB Rx gain accuracy 0.25dB Spurious emissions <-45dBm Pass band ripple <±1dB Demodulation Accuracy (in terms of EVM ) < 1.1% 400MHz to 2.0 GHz @ 256 QAM < 1.5% 2.0GHz to 4.0GHz @ 256 QAM < 1.5% median and 3.5% peak 4.0GHz to 6.0GHz @ 256 QAM TIMING ALIGNMENT SPECIFICATION VALUE TX Delay Alignment (TX port to any TX port) <=5nS RX Delay Alignment (RX port to RX port same CPRI link) <=5nS RX Path Alignment (variation between antenna) <=15nS Delay adjustment +/- 4nS Delay reporting T12,T2a ad Ta3 per the CPRI Spec
ZOMBIE COMPONENTS
THE LARGEST IXIA RESELLER ON EBAY
IXIA 5G RAN Testing Radiohead 400MHz-6GHz RH 400-600
Modified Ace Axis A RTSx4
HIGHLIGHTS
•400MHz to 6GHz frequency range
•FDD/TDD support
•4x4 MIMO
•Class leading RF timing alignment for OTA test
•100Mhz instantaneous bandwidth
•TX output power 0dBm (400-2700MHz)
•TX output power -10dBm (2700-5500MHz)
•TX output power -15dBm (5500-5925MHz)
•Support for CPRI V4.2
•CPRI line rates 1-8 supported
•Ambient temperature range 5-50 degree C
•RF connectors SMA
•Low power consumption typical < 80W
•Product Weight 12Kg
SPECIFICATION
VALUE
Bandwidth
100 MHz
Frequency ranges
400-6000MHz
Operating mode
FDD/TDD
Number of Tx/Rx paths
4x4 MIMO
Digital baseband I/F
CPRI V4.2
Clock reference
Recovered from CPRI line rate
Ambient Temperature range
5-50 C
Module RF connectors
SMA
Power meters
Tx and Rx power meters located at the antenna
Calibration
Continuous compensation of quadrature (IQ) imbalance
PSU Spec
100 – 240 VAC, 50-60 Hz; 80W
Replaceable or resettable fuse Input: IEC-C14
PHYSICAL/ENVIRONMENTAL AND ELECTRICAL SPECIFICATIONS
SPECIFICATION
VALUE
Height
1U
Depth
Depth 630mm;
Weight/Mass
12kg including removable rails (but with no packaging)
19” Rack connection
Tool-less rack supplied with product.
Rail Range: Min = 660mm ; Max = 800mm
Front Panel
8 x SMA RF connectors, female (4 x Rx, 4 x Tx) LED Panels: see Requirements section for details
Rear Panel
2 x SFP+ ports (bidirectional CPRI), 2x Ethernet Power Input: IEC-C14
Ground Lug with bolt/washer or equivalent 2 x SMA TDD pulse outputs
Cooling
Internal Fan cooling
TRANSMIT SPECIFICATIONS
SPECIFICATION
VALUE
Tx power (OFDM)
TX output power 0dBm (400MHz-2.7GHz) TX output power -10dBm (2.7-5.5GHz) TX output power -15dBm (5.5-5.925GHz)
Tx max. power (CW)
≥10dBm (400-2700MHz) 0dBm (2700-5500MHz)
-5dBm (5500-5925MHz)
Tx power meter
Wideband power @ antenna
Tx gain range
>40dB
Tx gain accuracy
0.25dB
Tx spurious emissions
<-45 dBm
EVM
<1.2% 400MHz to 2.0GHz;
<1.4% median and 2% peak 2.0GHz to 4.0GHz;
<1.6% median and 3.5% peak 4.0 GHz to 6 GHz
Noise power density
<133dBc/Hz @ 10Mhz offset
Tx to Tx isolation
>50dB
Tx to Rx isolation
>60dB
DAC
16 bit
Gain Flatness (over full bandwidth)
0.8dB
Ripple (over full bandwidth)
0.6dB
RECEIVE SPECIFICATIONS
SPECIFICATION
VALUE
Rx power max. (no damage)
30dBm
Rx power meter
Wideband power @ antenna
Rx gain range
60dB
Rx gain accuracy
0.25dB
Spurious emissions
<-45dBm
Pass band ripple
<±1dB
Demodulation Accuracy (in terms of EVM )
< 1.1% 400MHz to 2.0 GHz @ 256 QAM
< 1.5% 2.0GHz to 4.0GHz @ 256 QAM
< 1.5% median and 3.5% peak 4.0GHz to 6.0GHz @ 256 QAM
TIMING ALIGNMENT
SPECIFICATION
VALUE
TX Delay Alignment (TX port to any TX port)
<=5nS
RX Delay Alignment (RX port to RX port same CPRI link)
<=5nS
RX Path Alignment (variation between antenna)
<=15nS
Delay adjustment
+/- 4nS
Delay reporting
T12,T2a ad Ta3 per the CPRI Spec
PAYMENT
We accept payment by any of the following methods:
PayPal PREFERRED
WE CAN ALSO ACCEPT CASH ON PICK UP, PROCESS CREDIT CARDS THROUGH PAYPAL OR OTHER FORMS OF PAYMENT BUT WE ASK THAT YOU COORDINATE THIS WITH US PRIOR TO MAKING A PURCHASE
SHIPPING
ALSO PLEASE NOTE THAT WE MAY TAKE UP TO 3 BUSINESS DAYS TO SHIP FROM THE TIME YOU ORDERED,
WEEKENDS ARE NOT COUNTED.... SO IF YOU PLACE AN ORDER FRIDAY NIGHT WE MAY NOT GET IT OUT UNTIL THE FOLLOWING WEDNESDAY (WORST CASE SCENARIO) THOUGH WE SHIP AS SOON AS WE CAN. WE ALSO RESERVE THE RIGHT TO CHANGE THE METHOD OF SHIPPING SELECTED AT THE TIME OF PURCHASE TO AN EQUIVALENT OR BETTER DELIVERY SERVICE THAT BEST FITS THE ITEM BEING DELIVERED.
IF YOU NEED A FASTER SERVICE, PLEASE TELL US SO WE CAN ADJUST OUR PRIORITIES BUT PLEASE DON'T EXPECT EXPEDITED SERVICE UNLESS YOU ASK US TO DO SO FIRST AS OUR COMMITMENT IS 3 DAYS IF YOU HAVE NOT SPECIFICALLY ASKED FOR FASTER SHIPPING.
WE SHIP WORLD WIDE .. SOME ITEMS MAY TAKE UP TO 5 DAYS TO PALLETIZE AND SHIP
Please note that the US Mail (USPS) may not be an acceptable choice for international shipping
due to package size and weight restrictions and export documentation requirements. If you choses USPS for your international shipment, you may be told you have to select FedEx or USPS or even DHL at a higher price due to the restrictions when using USPS. If you have a question on this, please confirm your shipping choice with us before placing your order.
INTERNATIONAL SHIPMENTS MAY BE DELAYED OR CANCELLED DUE TO EAR AND ITAR EXPORT COMPLIANCE REQUIREMENTS.
THE VAST MAJORITY OF OUR ITEMS DO NOT NEED EXPORT LICENSES AND CAN BE SHIPPED UNDER EAR99 AND OTHER EXEMPTIONS. ITEMS THAT DO REQUIRE EXPORT LICENSES SHOULD BE INDICATED WITHIN THE LISTING.
International Orders are subject to DUTIES, TAXES or other Import Fees; the bidder/buyer[s] is solely responsible for these fees, documents and transportation if held at a customs office in the destination country. In the event that you have questions about international shipping logistics please contact us before purchase.
RETURNS
UNLESS INDICATED AS "SOLD AS IS NO RETURNS, If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for 30 days from the date you purchased it OR LONGER, DEPENDING ON THE TERMS IN THE LISTING.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
QUALITY CONTROL
UNLESS AN ITEM IS INDICATED
AS "SOLD AS IS - NO RETURNS" YOU ARE COVERED WITH A FULL MONEY BACK GUARANTEE FOR AT LEAST 30 DAYS OR LONGER AS SPECIFIED IN THE LISTING.
ELECTRONICS IN GENERAL
WHERE POSSIBLE ITEMS ARE TESTED. THE VALUE OF AN ITEM GREATLY CONTRIBUTES TO THE AMOUNT OR EFFORT PUT INTO TESTING. IT JUST ISN'T POSSIBLE TO TEST MANY LOW VALUE ITEMS DUE TO THE TIME REQUIRED AND THE EXPENSES ASSOCIATED WITH IT. ITEMS THAT ARE NOT SPECIFICALLY TESTED IN DETAIL ARE VISUALLY INSPECTED AND REVIEWED FOR THEIR OPERATIONAL STATUS. REMEMBER ...YOU ARE COVERED WITH A MONEY BACK GUARANTEE REGARDLESS.
COMPUTERS
IN MOST CASES THE ITEMS WE SELL ARE Removed from used computers. THEY ARE Tested where possible. ON COMPUTER ITEMS WE GO A LITTLE FARTHER WITH OUR 100% MONEY BACK GUARANTEE BY OFFERING YOU OUR ZERO RISK NO QUESTIONS ASKED 60 DAY MONEY BACK WARRANTY ON ALL OUR COMPUTER PARTS .... WE WILL EVEN PAY THE RETURN SHIPPING COSTS FOR YOU IN ADVANCE. (ANY EXCEPTIONS ARE NOTED IN THE SPECIFIC LISTING)
APPLIANCE PARTS
Used items are cleaned, clear plastics are hand polished to reduce visible scuffs or scratches. Paint chips are sometimes but not always repaired. Lime and rust deposits are removed to the best of our ability. Some minor repairs may be performed. Any exceptional wear will be noted in our description. We do our best to restore any used item but the final condition the restoration is subjective to ones opinion. If you take issue with an Items condition we promise to work with you to resolve this. Note that stock photos are often used and are not the exact item being sold. If you would like to request a different or an actual photo of an Item you are interested in, please submit a request before buying.
Confused by the part numbers? Keep in mind that many companies make parts for many different brand names. There is a ton of crossover, here are some examples:
GE Brand Part: GE brands include:
Hotpoint
RCA
Sears / Kenmore.
Frigidaire Brand Part: Frigidaire brands include:
Gibson
Kelvinator
Westinghouse
Electrolux -Electrolux also makes various appliance models for Sears / Kenmore
Various others
Whirlpool Brands Parts: Whirlpool brands include
Whirlpool
Maytag
LG
KitchenAid
Jenn-Air
Amana
Magic Chef
Admiral
Norge
Roper
Samsung
Various others
Sears / Kenmore
CONTACT US
WE ASK THAT YOU STICK TO USING EBAY AS OUR COMMUNICATION MEDIUM.
PLEASE DO NOT SHARE YOUR CONTACT INFO WITH US OR ASK FOR OUR CONTACT INFO
UNLESS YOU HAVE PURCHASED AN ITEM
AND NEED TO PICK IT UP OR YOU NEED TO DISCUSS AN ITEM THAT YOU HAVE ALREADY PURCHASED.
ONCE YOU HAVE PURCHASED AN ITEM WE WILL BE GLAD TO TALK WITH YOU DIRECTLY ON THAT ITEM.
ANY CONTACT OUTSIDE OF EBAY CAN RESULT IN THE SUSPENSION OF OUR ACCOUNT IN ANY SITUATION OUTSIDE OF THESE REQUIREMENTS.
ATTENTION PLEASE!
IXIA CLIENT SOFTWARE:
The software provided on all Ixia items is the server software only. The server software has ixserver and ixplorer as the only desktop applications. The server application licensed features are accessed through various Ixia client applications that interact with the chassis server.
You can download the Ixia client applications if you have online access with Ixia. These client applications are typically free from Ixia but you will need an Ixia logon account
. We offer a selection of these applications to our customers at no charge but the selection is incomplete. We do not sell these with the servers as a package. Client application needs are the buyers responsibility, we do not guarantee that we will have all your needs though we will try to assist you if we can. We only guarantee the server applications as itemized in the listings.
In a single user environment you can set the client side GUI interface on a external PC or you can set them up on an application server when using a chassis in a multi-user environment to access and configure all the sub-license features included in a listing. Multiple chassis can be accessed in the client applications environment which allows you to use the licensed features of several chassis all at once in one interface.
WHAT YOU SEE IS WHAT YOU GET...
What is included in this listing will be shown in the pictures. If you do not see an
accessory
in the pictures and it is not specifically listed as included in the condition description or the listing description, the accessory is not included. Please read the descriptions completely for exceptions on this.
GENERAL REFUND POLICY
:
You are covered with a full money back guarantee for at least 30 days or longer as specified in the listing, unless an item is indicated as "Sold as is - no returns". We go beyond that by promising that if you are dissatisfied for any reason and if we cannot fix this with you, we will give you 100% of your purchase price back as a cash refund. This will include the original shipping costs if your dissatisfaction is due to an issue with the item you bought being "Not as described".
ALL WE ASK IS THAT YOU CONTACT US FIRST AND GIVE US A CHANCE TO WORK THINGS OUT WITH YOU. PLEASE DO NOT LEAVE NEGATIVE FEEDBACK IF YOU HAVE NOT FIRST CONTACTED US TO FIX WHATEVER ISSUE YOU HAVE.
WE SHIP WORLD WIDE!
See our other items
Modified Ace Axis A RTSx4
HIGHLIGHTS
•400MHz to 6GHz frequency range
•FDD/TDD support
•4x4 MIMO
•Class leading RF timing alignment for OTA test
•100Mhz instantaneous bandwidth
•TX output power 0dBm (400-2700MHz)
•TX output power -10dBm (2700-5500MHz)
•TX output power -15dBm (5500-5925MHz)
•Support for CPRI V4.2
•CPRI line rates 1-8 supported
•Ambient temperature range 5-50 degree C
•RF connectors SMA
•Low power consumption typical < 80W
•Product Weight 12Kg
SPECIFICATION
VALUE
Bandwidth
100 MHz
Frequency ranges
400-6000MHz
Operating mode
FDD/TDD
Number of Tx/Rx paths
4x4 MIMO
Digital baseband I/F
CPRI V4.2
Clock reference
Recovered from CPRI line rate
Ambient Temperature range
5-50 C
Module RF connectors
SMA
Power meters
Tx and Rx power meters located at the antenna
Calibration
Continuous compensation of quadrature (IQ) imbalance
PSU Spec
100 – 240 VAC, 50-60 Hz; 80W
Replaceable or resettable fuse Input: IEC-C14
PHYSICAL/ENVIRONMENTAL AND ELECTRICAL SPECIFICATIONS
SPECIFICATION
VALUE
Height
1U
Depth
Depth 630mm;
Weight/Mass
12kg including removable rails (but with no packaging)
19” Rack connection
Tool-less rack supplied with product.
Rail Range: Min = 660mm ; Max = 800mm
Front Panel
8 x SMA RF connectors, female (4 x Rx, 4 x Tx) LED Panels: see Requirements section for details
Rear Panel
2 x SFP+ ports (bidirectional CPRI), 2x Ethernet Power Input: IEC-C14
Ground Lug with bolt/washer or equivalent 2 x SMA TDD pulse outputs
Cooling
Internal Fan cooling
TRANSMIT SPECIFICATIONS
SPECIFICATION
VALUE
Tx power (OFDM)
TX output power 0dBm (400MHz-2.7GHz) TX output power -10dBm (2.7-5.5GHz) TX output power -15dBm (5.5-5.925GHz)
Tx max. power (CW)
≥10dBm (400-2700MHz) 0dBm (2700-5500MHz)
-5dBm (5500-5925MHz)
Tx power meter
Wideband power @ antenna
Tx gain range
>40dB
Tx gain accuracy
0.25dB
Tx spurious emissions
<-45 dBm
EVM
<1.2% 400MHz to 2.0GHz;
<1.4% median and 2% peak 2.0GHz to 4.0GHz;
<1.6% median and 3.5% peak 4.0 GHz to 6 GHz
Noise power density
<133dBc/Hz @ 10Mhz offset
Tx to Tx isolation
>50dB
Tx to Rx isolation
>60dB
DAC
16 bit
Gain Flatness (over full bandwidth)
0.8dB
Ripple (over full bandwidth)
0.6dB
RECEIVE SPECIFICATIONS
SPECIFICATION
VALUE
Rx power max. (no damage)
30dBm
Rx power meter
Wideband power @ antenna
Rx gain range
60dB
Rx gain accuracy
0.25dB
Spurious emissions
<-45dBm
Pass band ripple
<±1dB
Demodulation Accuracy (in terms of EVM )
< 1.1% 400MHz to 2.0 GHz @ 256 QAM
< 1.5% 2.0GHz to 4.0GHz @ 256 QAM
< 1.5% median and 3.5% peak 4.0GHz to 6.0GHz @ 256 QAM
TIMING ALIGNMENT
SPECIFICATION
VALUE
TX Delay Alignment (TX port to any TX port)
<=5nS
RX Delay Alignment (RX port to RX port same CPRI link)
<=5nS
RX Path Alignment (variation between antenna)
<=15nS
Delay adjustment
+/- 4nS
Delay reporting
T12,T2a ad Ta3 per the CPRI Spec
