Hioki 3193 Power Analyzer

Description

Hioki 3193 Power Analyzer
Fully working order,  this Hioki 3193 is  used item.
Y
ou will receive:
Hioki 3193 Power Analyzer
Used machine , and
Works well, if you are not satisfied with item, you are welcome to return it, we will refund or replace it for you
It doesn't have its original packing ,and all 4 rear feet was missing !
Used Machine without packing,
no any input units like 9600, 9601 and 9602.
Its default setting is in Japanese format . We don't know it may be switched to English or not.
Product Highlights
A rich assortment of measurement functions including voltage, current, power, waveform peak value and efficiency
High-precision with basic accuracy of ±0.2 %, high-speed response of 0.1 s
Measure up to six circuits simultaneously
Select from 3 types of input units
Hioki 3193 multi-function power meter is for use with single phase power lines to 3-phase, 4-wire circuits. Accommodating up to 6 units, the unit is not only capable of measuring up to 6 single phase systems, but can simultaneously measure the input and output of a 3-phase inverter and provide effective power measurements. Additionally, it supports harmonic analysis and flicker measurement(optional), features which are essential for overall device assessment.
Specifications
Measurement lines
Single-phase/two-wires to three-phase/four-wires (Through the use of various input units)
Measurement items
(When using 9600 / 9601 / 9602, optional)
Voltage, current, voltage/current peak, effective/reactive/apparent power, power factor, phase, frequency, current/power integration, load rate, efficiency
(When using 9603, optional)
Voltage, torque, RPM, frequency, motor output
(When using 9605, optional)
Harmonic, waveform, voltage fluctuation / flicker measurement function
Measurement ranges
Voltage: 6.0000 V to 1.0000 kV (depends on use of the input unit)
Current: 200.00mA to 500.00 A (depends on use of the input unit)
Power: Depends on combination of voltage and current ranges
Integration range
0 to ±999999 TAh/ TWh, (integration time up to 10000 hours)
Basic accuracy used with 9600 to 9602 Input unit
±0.1 % rdg. ±0.1 % f.s. (voltage, current, power, at 45 to 66Hz)
Note: When used together with the 9270 to 9272, and 9277 to 9279, resulting accuracy is the sum of that indicated above and the accuracy of these clamp-on sensors
Frequency characteristics
used with 9600: DC, 0.5 Hz to 1 MHz
used with 9601: 5 Hz to 100 kHz
used with 9602: DC, 0.5 Hz to 200 kHz (depends on the clamp-on sensor accuracy)
Signal output
Analog level: Voltage, current, active power, 5 V DC f.s.
Waveform monitor: Voltage, current, 1 V rms f.s.
D/A output: Outputs 8 arbitrarily selected items, ±5 VDC f.s.
Other functions
6.4 inch TFT color LCD, RMS/MEAN rectification, FDD, GP-IB/RS-232C interface, scaling, averaging
Power supply
100/120/200/230 V AC (switched automatically), 50/60 Hz
Dimensions (WxHxD)
16.93" x 5.91" x 14.57" (430 mm x 150 mm 370 mm)
Weight
33 lbs (15 kg) with all options
No other accessory are being sold with the item (Cables, manuals, Software, etc.),  unless it is mentioned in the description and shown in the picture.
It comes with one 14 days warranty.
Please contact us if you are not satisfied with your purchasing.